Gothic Paint Funnel Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
What? A holder to align a small plastic funnel with the body of a 15ml dropper bottle for paint transfer.
- Ocena
- 5 / 5
- Polubienia
- 95
- Pobrania
- 1068
- Wydruki
- 2
- Wyświetlenia
- 5904
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
What? A holder to align a small plastic funnel with the body of a 15ml dropper bottle for paint transfer.
Used to help transferring paints, as in this tutorial from FauxHammer
Why? Because:
- You want to transfer your Games Workshop paints into lovely dropper bottles,
- You want the funnel supported above the 15ml bottle so you don't lose any paint,
- Your tools should have the same future gothic asthetic as your minis!
How? Print with no supports (it's all 45 degree overhang maximum) and zero infill, use adaptive z-height if available for the best external finish.
Should you want a slightly more supported funnel, the support ring can be glued in just under the roof, but it's not required.
Print instructions
Works nicely in PLA.
Designed to not need supports, with a maximum overhang of 45 degrees.
Printed with 0% infill.
Wall thicknesses expect a 0.4mm nozzle.
Adaptive layer height will produce a much better surface finish.