Creality CR-10 Smart Fulcrum Printhead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Complete printhead for the (in)famous CR-10 Smart with dual part-fan, MicroSwiss full-metal hotend and Bondtech LGX-Lite
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 1467
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Creality CR-10 Smart Fulcrum Printhead
This is a custom, complete, fully reversible replacement of the printhead, featuring a full-metal MicroSwiss hotend, a Bondtech LGX-Lite in directdrive setup, dual part fan (and fanducts), hotend fanduct.
It is aimed to:
- implement full-metal hotend and directdrive setup as CR-10 Smart deserves;
- reduce ringing by removing hotend fan and fanduct from the strain gauge assembly;
- let CR-10 Smart to easy print flexible materials;
- add left fan/fanduct for better overhangs (and overall print quality);
- mitigate bed autoleveling/probing by decoupling bowden tube from the printhead (bolted to the strain gauge sensor) and the push-pull problem of other directdrive designs that couple the extruder to the metal carriage.
IMPORTANT NOTICE: this design is for MicroSwiss + LGX Lite only and does not fit CR6 or other Creality printers.
Printing material: PLA+/PETG if not enclosed, otherwise ABS/ASA is mandatory. No supports needed.
BOM: – Work in progress --
Mounting instructions: – Work in progress --
If you want a complete ABS pre-assembled set of the printhead, it will be available for selling on discord channel.
If you like my design and you are happy with it, please consider donating a coffee to justify the time and effort in researching/designing.
Enjoy it!