Display stand for decoy fish
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this modular display stand for model decoy fish. This could be used for other types of longer items as well.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are several holes in the base to adjust the distance between the stands depending on your model. Tall and short stand options as well for varied height models.
The spears can be used to hold name cards or business cards.
0.2mm layer height is what I used for the base and 0.15 for the spears and stands. Lay spears and stands lying flat on build plate. I do use supports for the spear points and spear shaft. Try using 0.2mm 'top contact z distance" with snug style in PrusaSlicer. This worked best for removing the small supports around the spear points while retaining some detail.