Fang Skull

Fang is a fully 3D printable animatronic dragon.

These are the files for Fang's head.

You will see a file called All Skull Parts V2.Zip you should download this as it includes all the skull parts, some helpful pictures, and tells you which parts need to be scaled up to 150% in Cura.

You will notice that I have included the SCALE.STL this is not mentioned in the tutorial yet. You will have to print A LOT of these (90-100% infill) if you want to cover his head with scales (That way you can make him look fearsome & cool and hide the servos). to connect the scales together you must slightly heat the arm (with a soldering iron or heat gun. Just make sure not to heat the body) and bend it 90 degrees and put the arm trough the loop of the second scale and weld them together with a soldering iron. (Refer to pictures above).

Important Notes:

You will need x4 Segment_V2 (the neck) parts scaled up to 150% in Cura printed at a 10% or higher infill.

You will also need x2 of the iris eye and x2 of the 2xEyeBallFullV2.

Cylinder.STL is optional. You can use PVC glue to join the skull parts together instead of using the cylinder.

Print Settings

Rafts:

Doesn't Matter

Supports:

Yes

Infill:

10-100%

Notes:

Some files need support others don't.
For example, the Rack, Ram Horns and SKULL\_Parts, & Mandible defiantly need support and they need to be scaled up to 150% in Cura.

55mm fin should be printed with a 90-100% infill as it is very thin.

Important:

All these parts must be scaled up to 150% in Cura:

Segment_V2 (I printed 4 of these), RAMHORN L & R, Skull_Parts 1-3, Teeth Down & Top, Mandible_Parts 1-2, Cylinder (This is optional to print. I did not print as it took to much time and material. You can use PVC glue to join the skull pieces together instead of the cylinder).

Category: 3D Printing