Christmas Tree Ornament Set (Vase Mode Prints)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,11 € – 0,14 € netto (bez VAT)
Dla pliku: 97% Cap for snug fit / ornament-cap-97percent_02mm_pla_mini_9m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,12 € netto (środek widełek).
- Masa podana przez autora
- 1 g
- Czas druku podany przez autora
- 9 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A set of 6 unique Christmas ornaments. Designed to print in Vase Mode, making for beautiful light weight tree ornaments.
- Ocena
- 4,943 / 5
- Polubienia
- 10 594
- Pobrania
- 39 213
- Wydruki
- 688
- Wyświetlenia
- 160 044
- Oceny
- 558
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas tree. They also print fairly quickly, easily fill up a full sized tree with just a few days worth of printing.
I printed some using Spidermaker Matte PLA, and they turned out beautifully! Also printed some using MatterHackers Quantum Dual Color PLA, which added a gorgeous color changing effect when the ornaments spin (see video).
I printed all of my ornaments using the standard Vase Mode settings in Prusa Slicer, the only settings I changed were the nozzle temperature since the MatterHackers PLA printed at a higher temp, as well as the extrusion width for both the perimeters and external perimeters. I changed this value from 0.4 mm to 0.6 mm, which created prints with thicker walls, and more overlap between layers at steep angles. This will make the ornaments much less fragile.
After the ornaments are printed, the top can be easily snapped off using a pair of pliers, it should split cleanly along a layer line. Make sure to leave enough of the neck to attach a ¾" ornament cap. I got mine off of Amazon, but they should be easy to find at any craft store as well. Pick up some ornament hooks as well, or get creative with a bit of ribbon or twine.
All 6 ornaments are designed to fit a full size tree, but they can also be sized down to ⅔ scale to fit a mini tree. These mini ornaments will require standard ½" ornament caps.
P.S. If you’re looking for even more spiral vase printed ornaments, click here to check out my 6 2023 ornament designs!
And here's a link to my latest ornament designs!
