1 / 6
Norway Maple Seed Whirlybird that actually works, 5 minute print time — zdjęcie 1
1 / 6

Norway Maple Seed Whirlybird that actually works, 5 minute print time

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Maple seeds remind me of the fall, as they literally fall during the Fall. There are none near me, so why not print it!

Ocena
5 / 5
Polubienia
27
Pobrania
98
Wydruki
4
Wyświetlenia
1257
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Engineering
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Maple seeds remind me of the fall, as they literally fall during the Fall. There are none near me, so why not print it!

 

video of drop test #2:

 

video of drop test:  

 

After searching online and finding a few existing designs to print, none worked reliably.  After highly modifying a design from a university experiment, printing the seed at only a .05mm first layer height had great results.  Some trial and error was used to make the print as light as possible while maintaining the helicopter effect when dropped and increasing its flight time.

The source project set out to mimic the actual seeds' flight, while I set out to just make it print reliably, use as little filament as possible, and increase the whirlybird effect.

 

Sources:

Tagi