Motorized Mini Escalator Speed Control version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix from the original part, add speed control system.
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 1330
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
The Escalator design is such great. Thanks to AlexY!!!!!!!
Remix update!!
So i printed it with my SLA machine.
Find out its so difficult to assemble.
Easy Way to Assemble
In my opinion, the right way to assemble the escalator is forget about the electric part.
no.1 handrail mid guide + 32*steps +drive side sprocket +track guide +outer guide
no.2 disassemble the one side and add the track guide in.（if possible add some lubricant）
no.3 do the same on another side.
no.4 add the electric part.
Add Speed Control System
I add the 5V-36V PWM control board with forward and reverse switch.
But this board only working in 5v.(tested)
https://detail.tmall.com/item.htm?id=644650177551&spm=a1z09.2.0.0.3a132e8dqAzJkJ&_u=s1ti3vh41c1
Change to DPDT 3-position On-Off-On toggle switch
Add a new charging board can charge the 18650 battery,
Also can output 5V.
https://detail.tmall.com/item.htm?id=649847206720&spm=a1z09.2.0.0.6ce72e8dqAMdnc&_u=s1ti3vhc1cd
Redesign the bottom cover, both side outer guide.
Add Acrylic side panel
Redesign the handrail mid guide that can fit the 1mm Acrylic side panel
