#0042 Display Stand - 3 sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helps you display your favorite pictures and other items.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 265
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to display some artwork from my daughter (10yrs old) in my office and couldn't find any models on Printables for what I needed, so I designed my own.
These particular items I have happen to be painted rocks, but you can use it to display anything you'd like.
Three sizes are provided, each at 2 different lean angles of the spine, 8° and 15°.
The 15° version is meant for desktop height, and the 8° version is more upright and intended for items more around eye-level.
Due to the lean angle, the 15° version tends to accommodate smaller items before tipping backward. Naturally, the 8° version can accommodate a bit larger items.
For Items Displayed at Desk-Level:
| Sizes, 15° Lean | Spine Height (mm) | Max Display Item Height or Diameter (mm) |
|---|---|---|
| Small | 45 | 70 |
| Medium | 60 | 88 |
| Large | 75 | 110 |
For Items Displayed Around Eye-Level:
| Sizes, 8° Lean | Spine Height (mm) | Max Display Item Height or Diameter (mm) |
|---|---|---|
| Small | 45 | 82 |
| Medium | 60 | 102 |
| Large | 75 | 117 |
Note: 2 orientations to print the stands are shown.
Print Recommendations:
- PLA is a good option for this model
- 0.2mm layer height, 2 walls
- No supports needed
Tip: For best print quality, avoid placing seams on overhang edges or faces.
If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!
Remember, you can earn some Prusameters if you post a pic of your make! Plus, it would make my day to see it. ;-D
Happy Printing!