Metal Ruler Caliper Gauges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Should fit most large metal rulers and yardsticks found in the US. Uses an M5 nut and bolt for a set screw.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 602
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I made these to convert the multiple 4ft rulers around the office into vernier calipers, you're not going to get 0.001" accuracy, but it will do the job.
Larger one has an opening measuring 53mm x 3.5mm
Smaller opening measures 35mm x 2mm
Stretch and shrink as needed.
You will need to slice or pause after layer 100 to insert an M5 nut.
Here's what I use since I'm running a printer with Marlin firmware, your milage may vary:
G0 X20
G0 Z 180
M104 S0 T0
M109 S100 T0
M107
M0 ADD M5 NUT
M104 S215 T0
M109 S215 T0
M106
This gets the gantry and print head out of the way and let the print head cool down if you're like me and walk away from your printer and forget about it on occasion.