1 / 3
Holder for Isopropanol and Other Items. Fits on Lack — zdjęcie 1
1 / 3

Holder for Isopropanol and Other Items. Fits on Lack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fully customizable via openscad-parameters

Ocena
0 / 5
Polubienia
2
Pobrania
10
Wydruki
0
Wyświetlenia
125
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Customizable by openscad-parameters.  Support mostly not needed, but you might define a minimal support at the end of the rails or a brim (like 5mm). See pictures and 3mf-file. If you got problems with the bridges, try to cut model into two parts. The bridged area needs some afterwork (see picture).

Tagi