Prusa Antivibration Flex Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable antivibration flexible feet from TPU 40D(Shore scale) for Prusa i3 MK3S+/MK3S/MK3.
- Ocena
- 4,857 / 5
- Polubienia
- 52
- Pobrania
- 365
- Wydruki
- 7
- Wyświetlenia
- 1263
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Printable antivibration flexible feet from TPU 40D (or less)(Shore scale) for Prusa MK3S+/MK3S/MK3. They mute the sounds of the printer much more efficiently than the orginal feet (tested). They are slightly higher than the original ones, so there is no need to remove the factory ones.
Printing instructions:
Shell:
- 1 - soft (dampens vibrations of almost any frequency)
- 2 - hard (do not dampen low-frequency vibrations)
- 3 - very hard(I definitely don't recommend)
Top/Bottom Layers: 3-4
Infill: 20-30% (I think any structure will be ok)
Support: Yes
Other:
Initial Layer Horizontal Expansion: -0,1/-0,2mm (for better first layer)
Remember: If you print tpu, you must print slow about 20-15mm/s
They are simple but they work. They look and fit great. If you have any questions, write in the comments.
Enjoy printing!