Nerf Hammershot 7 Shot cylinder (Rotator updated)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mod for the Nerf Hammershot, it is a fully 3d Printed both short and normal sized 7 round nerf dart cylinder.
- Ocena
- 3,5 / 5
- Polubienia
- 42
- Pobrania
- 406
- Wydruki
- 2
- Wyświetlenia
- 2027
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Share Alike
This is a Remix of : https://www.thingiverse.com/thing:5345813
The original Model's Rotation Piece was to long and pushed on the front end of my Nerf Hammershot. I removed the pins that held the darts in to increase the power.
Post Printing:
Put the Rotator in the back of the cylinder (it should fit in smoothly), remove the stock cylinder and put in the 3d Printed Cylinder. Then boom! Now you've added an extra 2 shots.
(notes: I recommend you remove the air restrictor first because the dart fit is a little tight, but not enough it won't fire. For the longevity of the spinner don't spin it to suddenly or forcefully when it is cocked. )