Shaving Brush Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was designed to hold a brush along with the jar of shaving soap (Mitchell's). I've provided a sketch of the sizes…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was designed to hold a brush along with the jar of shaving soap (Mitchell's).
I've provided a sketch of the sizes so you can check if they'll fit your kit.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10-20%
Notes:
Print with the ring on the bottom, the post pointing up. In other words, print in its orientation it will be used.
The arms should be printed with the rounded edges on top.
Post-Printing
The "arms" needs to be connected to the base via the tab. You will likely need to shave down the tab or the slot -- super glue may also be required.
Category: Bathroom