German Garbage Truck with closing Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi Remixed my Remix again and Put a Lid on it with Knobs :-)
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 171
- Wydruki
- 3
- Wyświetlenia
- 2477
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
I Remixed my Remix:
https://www.printables.com/de/model/298498-german-garbage-truck-mullauto
Now the Garbage truck has a Lid, but i only works good now for the bigger Duplo Trucks, as it has become heavier on the back. But if you only have a small duplo car you can still print the other simpler version.
In one Pictures you can see that 6 2x2 bricks fit inside.
Printing Instructions IMPORTANT!:
First Print the Lid.
Then Print the Main Model, but add a Filament change or a Stop, to put the Lid in Place. This happens at the Layer which bridges the Lid holes. Also Disable supports in that region! (See pictures!) Or Use the MF File, where I already put the support blockers inside
Also add a bit of Supports inside, but dont fill it all up, so you get a nice Finish. (see Pictures)
And as always please share your Print and rate my model :-)