1 / 1
1/2NPT 150-200psi safety rupture valve — zdjęcie 1

1/2NPT 150-200psi safety rupture valve

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is very much a bottom line pressure safety valve. It goes bang and fails when pressure gets past about 150-200psi

Ocena
0 / 5
Polubienia
3
Pobrania
19
Wydruki
0
Wyświetlenia
197
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Came up with the idea to make a disposable rupture valve for pressure systems when testing. You can vary the failure point by increasing and decreasing the top surface thickness. You will have to dial it in and do some math to get the failure point you desire. 

This is very much a “make it work” part and will fail in a catastrophic fashion, meaning shrapnel. So if you use it, take that into account with placement to avoid injury.

Better than a pressure vessel explosion though.

Tagi