Tec 305-12 hotmelt glue gun trigger link
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part is to replace a broken Tec 305-12 Hotmelt glue gun trigger link.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This part is to replace a broken Tec 305-12 Hotmelt glue gun trigger link. The original part is thin and has a hole close to the edge. Mine broke at that spot. This replacement part is wider and thicker, but still fits inside.
I made two versions of the replacement part: with and without a screw hole for the axle. This is because the axle is also thin (and cannot be made thicker as it would not fit), and being a 3D printed part is weaker than the original. So my thought was to reinforce the axle with a small screw. You can see this in one of the pictures. I used a 5/8" long #3 flat head machine screw, for which I tapped the screw hole.
How I printed
I printed the part from ABS in hope it can withstand the heat inside the gun. The axle being a small protruding part needs slower speeds and extra cooling. It also needs supports for the lock protrusions.
First published
Imported from Thingiverse. No changes.
https://www.thingiverse.com/thing:3732549
Category: Parts