Rode NTH-100 FitLok repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick repair of the right outer shell of the headphones locking mechanism. Its asymmetrical so flip before you print
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 662
- Wydruki
- 1
- Wyświetlenia
- 2783
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Quick repair of the outer shell of the fitlok, 4 are included in the print just to fast track prototyping. Remove as needed.
I printed at 105% and it was a snug fit.
v1 lasted from Nov to May, made a v2, and now that my printer is calibrated I had to print it around 107%. The inside hole should be about 26mm in length. My v1 was 26.1 when I printed it at 105 on my uncalibrated printer, and now calibrated its around 26.6. So long as the part fits snugly it should be fine.
v2.1 time! This time on the Prusa mk4 and as a 3mf so download files should be accurate and require no scaling barring printer calibration. At this point both original fitloks are broken. I haven't been able to get the left fitlok properly “locked” but its locked enough where it doesn't move around during use. So good enough. PLA or PETG works. For this version I used PETG because why not