Flat webbing clip for webbing sized 0.5-1 in (13-26mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a clip to attach things to flat webbing between 0.5-1 in (13-26mm). One side is closable allowing easy mounting.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 657
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
These are clips to attach things / projects to flat webbing. One side is closable allowing easy attachment and detachment from webbing on packs, clothing, etc., and it closes securely and won't slip open under reasonable load.
There are two versions of the clip. The small clip has a 0.75 inch (20mm) wide hole, and the large version has an inch (26mm) wide hole.
To close the clip, attach it to the webbing and squeeze together at the curved indentation.
I printed these in PETG for a bit more durability than PLA and they lasted a multi-day backpacking trip with no problem. I suggest printing with 99 perimeters (or any other high number) for strength and durability. These clips were designed for 3d printing so the clips should print perfectly without supports.