Pokeball Claw Toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the expanding Claw, but with a Pokeball on the end
- Ocena
- 2 / 5
- Polubienia
- 41
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 990
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
I decided to remix the print in place claw toy gripper and put a Pokeball on the end. This version is not print in place however. I have modified the pins so that the snap in place. To print, you will need to print one of each file. If you want to print additional mid pieces to extend the length you can, however I found that it gets wobbly as you add more. I printed it at 150% to make it close to the size of what a real Pokeball would be. I printed the top and bottom halves with the open side facing up and tree supports. I also suggest using 3 or 4 walls since the snap part of the pins may break when putting them together. I may update this in the future to eliminate pins altogether and use bolts instead.