Dial Gauge Holder for Wheel Truing Stand V2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple dial gauge holder to attach to caliper of a wheel truing stand like Park Tool TM 2.2
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 1460
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
NEW VERSOIN. Added a ball bearing holder for the dial gauge, so that delicate carbon rims won't be scratched.
This is a simple device to attach a standard dial gauge with 8mm stem to the caliper of a wheel truing stand to fine tune bicycle / road bike / mountain bike wheels.
Besides the printed parts You need:
3 x M4 Ruthex Inserts
2 x M4 x 20mm Hex screw
1 x M4 x 30mm Hex Screw
3 x M4 Nut
Assembly is self explanatory. Have a look at the pictures. I used M4 inserts that can be purchased online. Ruthex are the best. But other brands may work as well. You need to use a soldering iron (350°) to push them in. Videos on the process can be found on YouTube.
The Knobs have the M4 nuts on the back side. After tightening them I used a drop of CA glue to prevent them from unscrewing.
Print according to the 3mf files I attached for Prusa Slicer.
Tried it myself (of course) and it works perfect. The dial gauge is held in place nice and firmly.
Can be used for lateral and radial truing. When building a wheel I use this tool only as the very last step. The main work can be done with the standard calipers. This tool will tell you how close you got to your goal of 0.25mm lateral truing for instance.
Added a dial gauge ball bearing holder that is compatible to standard dial gauges with a 4.5mm plunger with an M2.5 thread. Use a 4x9x4 ball bearing type 684 and screw it on with a M4x8mm screw. I added a shrink tube over the outer diameter of the ball bearing for additional scratch protection.