Khadas VIM4 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very early version of a case for the Khadas VIM4 SBC.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 218
- Wydruki
- 0
- Wyświetlenia
- 1253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Early version of a case I designed for the VIM4. It supports all ports and buttons, though it does not expose the main pin header, and does not have a spot to secure the external A/B antennas. Air vents are aligned to match the active cooling kit.
To assemble, gently slide the board into the large box. Make sure the ports fit snugly within their cut-outs (not behind them). I found it helped to use a couple USB sticks to maneuver the ports into the correct position. Once the main board is seated, secure the back panel with four m3x6 screws.
To disassemble, unscrew the back panel and push the board out by pressing on the ethernet port (which sticks out the farthest).