Intel NUC StarWave Sideby Side Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Mount design to allow attaching an Intel NUC to a Starwave side-by-side mount.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 500
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution
Simple Mount design to allow attaching an Intel NUC to a Starwave side-by-side mount. Central hole allows a M6 hex bolt to be threaded through allowing the bolt to be recessed. There are two pins on the bottom 35mm centres which slot into the two blanks on the side by side mount to keep everything aligned. NUC is attached with 8mm hex bolts.
USB ports are aligned along the axis the scopes would point.
I printed with 0.2mm layers height and 4 perimeters. Used some support material to suppirt the lip on the the large central hole.