1 / 6
Compactor - Ender 2 Pro Volcano CPAP Printhead
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact Ender 2 Pro printhead based on K3D Minifider (slightly reinforced) BMG, Volcano, CPAP and stock radiator
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 1269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
Compact Ender 2 Pro printhead based on K3D Minifider (slightly reinforced) Nema 14 36mm pankake stepper motor
Uses 5A BMG gear set and stock ender 2 pro radiator and optionally 4010 fan
Volcano heatblock, thermistor and heater required
- Compact and efficient
- Fits on Ender 2 Pro
- Volcano hotend
- Slightly print volume losses: 165x160 for Ender 2 Pro (use https://www.printables.com/model/330621/ to compensate this effect)
- Easy to print - no supports needed
- Shortest volcano gears-nozzle channel length
- Light - ~220-225g without carriage (305 with it) with 4020 maglev sunon
- Top CPAP airflow for model cooling :D
BOM
- BMG gears kit
- Volcano hotend
- 40x40x10(20) axis fan for hotend
- Nema 14 36mm pankake stepper motor
- CPAP 22/19 hose
- 2x M3x4x5 hot melt insert nut
- 1x M3x8 round head screw
- 3x M3x10 round head screw
- 2x M3x12 round head screw
- 2x M3x20 round head screw (you can use stock ones that fix radiator on carriage)
- Screws for fan may vary for different fan sizes)
- 19,5mm PTFE tube
Print settings
- Use any filament with ~80°C heat resistance (PETG, ABS, ASA, HIPS, PA, PP, PC, etc.)
- Use 3+ perimeters and 100%+ infill for max rigidity of all details
- 0.1 layer height recommended for Minifeeder details, everything else - 0.2
- The feeder based on K3D Minifeeder v3 by Dmitriy Sorkin (https://k3d.tech/minifeeder/) and reinforced by me