Raspberry Pi 1 B case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple screwed together case for the first generation Raspberry Pi Model B.
- Ocena
- 4,727 / 5
- Polubienia
- 85
- Pobrania
- 1510
- Wydruki
- 13
- Wyświetlenia
- 3508
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since apparently no-one makes or sells cases for the old first gen Raspberry Pi Model B anymore I decided to create one on my own.
It's a rather simple and functional design but has everything that it needs.
The case is held together with screws and the PCB inside is clamped into place by the top case half.
Optionally the PCB can also be screwed into place for extra rigidity (if you have the version with screw holes).
Most of the connectors are recessed into the case due to the way how the Pi 1 PCB was designed.
For assembly you need 4x M3x8mm self tapping screws.