1 / 1
Tronxy X5SA-600 Y-Belt Tensioner — zdjęcie 1

Tronxy X5SA-600 Y-Belt Tensioner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A clean way to tension the Y-Belt on your mega printer.

Ocena
0 / 5
Polubienia
0
Pobrania
15
Wydruki
0
Wyświetlenia
508
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A clean way to tension the Y-Belt on your mega printer, in case you were crazy enough to buy one. 

You will need a standard ZZ608 bearing, two “M4 Nut 8 Hammermuttern” (hammer nut?) and some M4 screws for this mod. Works as PETG/PLA print.

Good luck. Contact me if you have issues with your X5SA-600 printer. :)

Tagi