Sewing box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fully 3D-printable foldable box for sewing accessories.
- Ocena
- 4,95 / 5
- Polubienia
- 846
- Pobrania
- 1792
- Wydruki
- 24
- Wyświetlenia
- 15 951
- Oceny
- 20
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a fully 3D-printable foldable box for sewing accessories. Beside 3D printer and about 1650g of filament you only need some superglue to fix it all together.
Outer dimensions are 160x170x70mm for the smaller boxes and 320x170x70mm for the large bottom one. All walls are 5mm thick. Overall dimensions are 360x185x313mm and all parts are optimized to fit common printers like Prusa i3 or Ender3. The longest part to be printed in one piece is the side frame it must be printed diagonally to fit the bed. The bottom box is provided both in one piece and split into two parts, choose the option that fits your printer.
Feel free to experiment with different colour combinations and share the results with the others.
Print instructions
If there are supports needed it is written in the file name among the the number of pieces to be printed. I printed with a variable layer height option in PrusaSlicer. Settings were 0.2mm base layer height and adaptive Quality/Speed option set to 0.00 (max quality). Total print time was 7 days 13 hours and 30 minutes.