Mixing rod / Mischstaberl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mixingrod ("Mischstaberl"). Designed and tested for stirring epoxy, disolving citric acid crystals, ease-of-printing.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 226
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
A mixingrod (or "Mischstaberl" :-). Designed and tested for stirring epoxy and disolving citric acid crystals. Also for easy and fast printing.
Model (more exactly: the strength of the walls and the bottom) are derived from Prusaslicer recommendations for mk3s/0.6mm-nozzle/0.35speed-profile, which are also the only print settings I tested it with. See screenshot for values. Might work with different settings. :)
If you want to change, adapt, or experiment: fusion360-file is attached.
With Petg, with the settings mentioned above, and constrained to 7mm^3/s max volumetric speed (for the default heat-end) one single mixing-rod is estimated to take about 20 minutes of print-time.