Car Bulb Container for H7 W21/5W and W5W bulbs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Can fit one H7 bulb, one W21/5W or W21W bulb and 2 W5W bulbs. Due to the differences in bulb dimensions from different…
- Ocena
- 4,5 / 5
- Polubienia
- 18
- Pobrania
- 87
- Wydruki
- 7
- Wyświetlenia
- 785
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Can fit one H7 bulb, one W21/5W or W21W bulb and 2 W5W bulbs.
Due to the differences in bulb dimensions from different manufacturers bulb fit can range from tight to loose so always keep the container in correct orientation when opening.
Designed for printability, wide tolerances, does not require any supports etc. 0.15 layers recommended.
If stored in the car print in PETG or ABS as PLA will warp if car is left in the sun.
Source file: https://a360.co/2P4CanS
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
10%
Filament: Fiberlogy PETG Vertigo Grey
Category: Automotive