Raspberry Pi Compute Module 4 with Waveshare nano b / a CM4 case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small case to enclose a raspberry pi compute module with a waveshare nano b board with space to allow for a heat sink.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 380
- Wydruki
- 1
- Wyświetlenia
- 2040
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A small case to enclose a raspberry pi compute module with a waveshare nano b board with space to allow for a heat sink.
EDIT: Requested, nano A has been added. I do not have the board myself, so feedback welcomed.
The idea was to be simplistic and print with 1 model and have access to all ports.
To insert, start with the ethernet port angled down towards the bottom and insert at that angle, then with a little pressure slide the USB/hdmi side down. It is only a little snug, with a tang on the USB side to hold in place.