1 / 2
X-axis tensioner for P3Steel with 3mm hole for pulley shaft
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Change Toolson X-axis tensioner from 6mm hole to 3mm hole
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
You are better off using the original design, and getting the shoulder bearings that Toolson used! I see I posted photos of the original design
I used meshmixer to fill the 6mm holes in the X-axis belt tensioner from toolson. I used the Windows 10 "3D Builder" to drill a 3mm hole through the part where the 6mm one was.
Thank you for sharing your parts toolson!
Print Settings
Printer:
Prusa Original i3 MK2
Rafts:
No
Supports:
No
Resolution:
.15
Infill:
50%
Category: 3D Printer Parts