1 / 2
MK3S Spool holder // Deep Groove Ball Bearing upgrade
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had problems with cardboard filament spools that they have too much friction -> i designed a groove ball adapter
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 136
- Wydruki
- 4
- Wyświetlenia
- 1237
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 4) (Komentarze: 10)Remiksy (2)Kolekcje (65)Powiązane
I had problems with cardboard filament spools. They have too much friction.
-> i designed a groove ball bearing adapter for easier rotation of the spool.
(i like real groove ball bearings ;-) )
→ testet it now with several prints, and it works really great.
→ I used 6805-2RS bearings for this adapter
- put on the outer ring
- put the bearing on the inner ring, and this assembly on the original holderpart
- assemble everything.. the section cut is in the pictures so that you can see how it should look like.
Note: All single parts are in this one step part included.