1 / 5
VESA adapter plate for quick release monitor stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter plate from monitor stand quick release mount to 100mm VESA mount
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 270
- Wydruki
- 0
- Wyświetlenia
- 3199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (35)Powiązane
Adapter to mount regular VESA 100mm screen to a quick release stand.
Philips 240B9 monitor came with some weird proprietary mounting system that does not support standard VESA mounting. Since I'm already using third party 2 monitor stand I decided to make an adapter, so stock one can be used elsewhere.
- Total size: 170x170x14 mm
- Layer height: 0.2mm
- Infill: Gyroid 20%
- 6 perimeters and 6 layers top and bottom
- I've also added 100% infill blocks around the latches
- You would also need 4 M4 16mm screws to mount it to your monitor, since the base is pretty thick at 6 mms.
A bit messed up while modeling, so mount on the last photo was “fixed” with soldering iron. New .stl here won't have that problem.