1 / 2
Ender 2 Pro Y tensioner (6-12mm belts) — zdjęcie 1
1 / 2

Ender 2 Pro Y tensioner (6-12mm belts)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom printhead Y travel compensation tensioner

Ocena
0 / 5
Polubienia
19
Pobrania
130
Wydruki
0
Wyświetlenia
870
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Stiff Y axis travel compensation tensioner for custom printheads like Impact ( https://www.printables.com/model/296755-the-impact-printhead ), Compactor ( https://www.printables.com/model/329790-compactor-ender-2-pro-volcano-cpap-printhead ) or Elefantor ( https://www.thingiverse.com/thing:5514063 ), also for wider belts (6-12mm)

BOM:
M4*25 x 1 countersunk screw 

M4*30 x 1 bolt

M4 x2 Nuts
624ZZ x1 Ball Bearing (optional) - you can use 3-4 M4 washers instead if you don't plan using wide belt

624F x2 Ball Bearing (take them from stock tensioner)

Tensioner body is fixed by stock M5 screws inside profile.

Original print PETG 0.2 layer height, 100% infill.

 

Tagi