Prusament carousel for your Benchy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make your Benchy happy and give them this carousel.
- Ocena
- 5 / 5
- Polubienia
- 246
- Pobrania
- 331
- Wydruki
- 2
- Wyświetlenia
- 4258
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Make your Benchy happy and give them this carousel.
They'll find a comfortable seat for 8 Benchy and you can entertain them by turning the wheel.
Have fun with your Benchy!
To complete the assembly of the model, you need:
1x aluminum tube of about 9.5 cm long and 8 mm in diameter
2x bearings 8 mm x 22 mm x 7 mm.
In the video you can see the various steps to assemble the model.
1) Simply insert the hexagons into the respective holes in the spool with the tip towards the inside.
2) Prepare the Benchy carrier with the brackets and attach them to the hexagons, making sure that they oscillate freely.
3) Then insert the aluminium tube in the centre of the reel, where you previously inserted the bearing holders with the bearings, and complete the carousel by adding the two side supports.
4) Add you Benchy and let them have fun
The assembly is very simple and intuitive and if you have any questions, you can simply post them below.
I would love to see your prints on instagram as well.
Tag me @robertocolucci_3d
Print instructions
take a look at the video https://youtu.be/P6u5dikOxX8