Atari 2600 Modular cartridge Display stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular Display stand that you can expand to however many carts (and space) you have.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 77
- Wydruki
- 2
- Wyświetlenia
- 599
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Files to Print
Required
Print the appropriate files named "[region]_Display_Bottom" for the cartridges you want to display.
Then for each additional cart, you can print the files named "[region]_Extension_Cartpiece", and simply screw them on the previous one(s).
Additional
You won't need to print supports for every cartpiece, but I highly suggest doing it every other 2 to 3 pieces.
You can find "Extension_SupportConnector_25mm" and "Extension_SupportConnector_50mm", and they are meant to create whichever height you require, simply by screwing them together.
(note, depending on how tall people go with this, I may add more height variants in the future - just send me a message if you are in need of this!)
Optional
If you go in height too far, and notice the support structures become too "wobbly", you can print the "Extension_BaseConnector" pieces.
These slide into the holes for the support structures linking them together and stopping sideway movement.
Hardware
Required to connect cart pieces together:
2x M3 * 15/20mm
2x M3 square nut
Required to connect support connectors together:
2x M3 * 5/8mm
2x M3 square nut
(one for each side)
Other Prints
These are all the other variants available:
Atari 2600: [Printables Link]
Atari 7800: [Printables Link]
SEGA Master System: [Printables Link]
SEGA MegaDrive/Genesis: [Printables Link]
Nintendo 64: [Printables Link]
Super Nintendo/Famicom: [Printables Link]