Wildcat Keychain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multi-color wildcat keychain
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 160
- Wydruki
- 2
- Wyświetlenia
- 539
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
It's a bit large to truly work as a keychain, but could hang from a book bag or gym bag. I don't think it can be scaled down at all without causing issues, but I haven't tried.
I printed in PLA+ with 0.4mm nozzle, 0.2mm layer height, 20% cubic infill, and ironing enabled on top layer only.
The “trinkets” are printed in the colors you desire and then inserted into the base. The yellow trinket is a tight fit. I got as many parts of it started into the base as possible then laid it on its face on a flat surface and applied downward pressure to “snap” it into place. Some of the white trinkets require a dab of super glue to hold them in place.