Google Pixel 7 Case Slim Fit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slim case for google pixel 7
- Ocena
- 5 / 5
- Polubienia
- 102
- Pobrania
- 1403
- Wydruki
- 9
- Wyświetlenia
- 7052
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Edit 06.05.2023 : Added STL with 0.2 tolerance on all dimensions
I couldn't find a pixel 7 case thin enough for my taste so I decided to model one (with my very limited ability to do so).
There is two versions, one flat around the screen, and one with raised corners to avoid scratching the screen when put screen down.
I printed it in PLA with 50% tri-hexagon infill, no top and bottom layer, and 0.16 layer height/0.6 layer width to help with overhang but you can also remove the first two layers with the added benefit of an even slimmer case.
You might need to adjust the scale a bit if printing in PLA to avoid breaking the case when putting it on or removing it depending on your printer tolerances. Depending on the quality of the print a little bit of sanding below the raised corners might help too.
I plan on updating the model with cosmetic and fit adjustments.