Xmas Tree 'Vase'
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed my own christmas decoration in the shape of this tree look a like.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed my own christmas decoration in the shape of this tree look a like.
You can put a light source inside it (make sure it's not hot) or use it as a vase.
The height is 110mm.
🎞 How i designed it: https://youtu.be/GJ6lbMj3eY4
🎞 How i 3D printed it: https://youtu.be/NIrckVw8nxA
I printed a tree with 3.2mm thick walls scaled down to a 37.5% size, which results in a 1.2mm wall. I also printed a tree with 3.2mm thick walls scaled down to a 25% size, which results in a 0.8mm wall.
You can experiment with different sizes (wall thickness). The 100% scale version has a wall thickness of 3.2mm. I also added files with a wall thickness of 0.4mm, but it's probably more difficult to print. I used an extrusion width of 0.40mm.
⚠ Usage of any models from 3DParts4U will be at your own risk!
⚙ My PLA Simplify3D print settings:
- 3600mm/minute (60mm/second)
- hotend 185°C | bed 50°C
- 250 micron | infill 15%
- 2 top layers | 2 bottom layers | 2 outline layers
- brass nozzle 0.35mm
- extrusion width 0.40mm
- retraction 1.00mm
- extrusion multiplier 1.00
- coasting 0.30mm
- wipe distance 5.00mm
- fan 100%
- no support needed