Gryphon Mech Cover with Wire Bridges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mech Cover with added wire bridges
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 496
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
This is the Gryphon mech cover with 2 wire bridges added. I was having difficulty keeping wires out of the gear and pusher mechanism, so I modified the original mech pusher to include these parts. The bridges keep the wires flush against the outer mech cover wall to prevent them fouling the mechanical bits.
- Bridges are sized for a maximum size of 18AWG (2.3mm) wire.
- This mech cover mod was used on my own Gryphon blaster print.
When printing, there are 2 places that supports are likely needed. First at the wire entry way (see blue).
And second under the pusher mechanism (see blue). After the print the pusher mech supports can be popped off and a needle file used to smooth down the surface for the pusher rod.
