Whiteboard Accessory Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a tray to hold whiteboard markers, cleaner and an eraser.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 885
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution
I needed a tray to hold whiteboard markers, cleaner and an eraser. Searching didn't turn up any one thing that did all I wanted, so I created one. This was designed to mount with hidden fasteners, the back of the tray has a tapered dovetail, and there is a second part that is meant to be screwed to the wall. The wall mounting part should be printed standing upright, but upside-down to prevent the raised edge formed on contact with the print bed from interfering with the fit. If the fit is too tight, try scaling that mounting part up by 1%, or if it is too loose, scale it down.
Print instructions
Category: Office Summary
I needed a tray to hold whiteboard markers, cleaner and an eraser. Searching didn't turn up any one thing that did all I wanted, so I created one. This was designed to mount with hidden fasteners, the back of the tray has a tapered dovetail, and there is a second part that is meant to be screwed to the wall. The wall mounting part should be printed standing upright, but upside-down to prevent the raised edge formed on contact with the print bed from interfering with the fit. If the fit is too tight, try scaling that mounting part up by 1%, or if it is too loose, scale it down.