Big Einsy Case Cover - Circuit - MMU2S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for Big Einsy Case. Circuit design with MMU2S.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 549
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this cover to work with the Big Einsy Case. The cover is designed to be printed with MMU2s (or any other multi-material platform).
This cover still uses the same hardware as the original cover. There are circuit shaped cut outs to make sure there is sufficient airflow.
I printed mine with Prusa Orange PETG Prusament and Jet Black PETG Prusament. I would strongly recommend printing this with PETG because the residual heat from the print bed and the motherboard can cause the cover to warp.
I printed mine at 0.2mm layers with the detailed setting. It took around 5 hours, with eight tool changes.
I designed this using Fusion 360 and Tinker Cad.
Happy Printing