DWV PVC Pipe to 4" Hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two part adapter to convert DWV PVC Pipe to 4" Flexible Dust Collection Hose. Comparable to WoodRiver's part #151295.
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 190
- Wydruki
- 1
- Wyświetlenia
- 1399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NOTE: This part is superseded by an updated adapter that prints as a single piece. I do not recommend you use this one for future needs. It works fine, but it's a pain to epoxy together.
Two part adapter to convert DWV PVC Pipe to 4" Flexible Dust Collection Hose. Comparable to WoodRiver's part #151295. Parts must be glued or epoxied together.
https://www.woodcraft.com/products/dwv-pvc-pipe-to-4-inch-hose-dust-collection-adapter-fitting
Print instructions
Print with 0.3mm layer height, no supports needed. Approximately 3.5 hours to print both parts at the same time.