Sphericon Minimalist
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on a Minimalist Sphericon. I have chopped down as much as possible of the body to only keep the…
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 152
- Wydruki
- 4
- Wyświetlenia
- 685
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my take on a Minimalist Sphericon.
Both full model and half model included.
I glued 2 half together for the video.
I have chopped down as much as possible of the body to only keep the essential of it.
The goal is to Showcase the Square and Circle within the shape and still have a smooth rolling body.
The elastics in the pictures was used prior to glue to test concept.
Reddit thread with video of it rolling down a slope: https://www.reddit.com/r/3Dprinting/comments/hsu9bp/my_take_on_a_minimalist_sphericon_designed_in/
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
25%
Filament: Add:North Textura-PLA Black
Notes:
Flat side on build plate :)
Support if you need it ;)
The more infill the heavier body with more inertia.
Post-Printing
You need to print 2 of the STL-file and then glue them together.
After some sanding it rolls so smooth :)
Category: Math Art