1 / 3
Filament guide for MK8 extruder modified — zdjęcie 1
1 / 3

Filament guide for MK8 extruder modified

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I have modified "Filament guide for MK8 extruder" by jruutiai to have a larger hole for the spring & extended the…

Ocena
5 / 5
Polubienia
15
Pobrania
112
Wydruki
1
Wyświetlenia
681
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I have modified "Filament guide for MK8 extruder" by jruutiai to have a larger hole for the spring & extended the guide a few mm. There is also a larger space for a larger (10mm) bearing which works with the drive gear for gear which came with the 3D Printer MK8 1.75m extruder.

Print instructions

Category: 3D Printer Accessories Summary

I have modified "Filament guide for MK8 extruder" by jruutiai to have a larger hole for the spring & extended the guide a few mm. There is also a larger space for a larger (10mm) bearing which works with the drive gear for gear which came with the 3D Printer MK8 1.75m extruder.

Print Settings

Printer: Dremel 3d40

Rafts: No

Supports: Yes

Resolution: 0.2

Infill: 100%

Filament: Dremel PLA
Notes:

Supports - only touching build plate

Tagi