Windmill
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Windmill with bearings
- Ocena
- 4,571 / 5
- Polubienia
- 178
- Pobrania
- 925
- Wydruki
- 10
- Wyświetlenia
- 5946
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
need a bar 8 mm outer diameter, minimum 175 mm length. Rotational axis is actually a 30 mm long M5 bolt:
Two kind of clamps are provided: square (max 35 mm height) and circular (max 40 mm dia):
All the hardware needed:
- 8 mm outer diameter rod , min 175 mm length
- 2 M5 X 10 mm bolts, with nuts (to join the main body assembly)
- 1 M5 X 30 mm bolt, with 3 nuts (rotation axis) see sketch above
- 3 X skate roller bearing (608 size)
- 5 M5 X 10 mm bolts ( to secure the clamp and the main body lower support)
The assembly 3D model STEP file is self explanatory.
I printed the blades with a 0.25 mm nozzle because they get very narrow at the tops. I recommend the print on the given orientation, no supports needed except for the slots that hold the blades. All part fits a prusa mini.
important! one of the circular clamp screws moves on the contrary direction, and the reason is they are done by symmetry since I was to lazy on the CAD…