Espresso Distributor for Gaggia Cubika
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Espresso funnel/distributor for Gaggia Cubika basket carrier
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 962
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I liked the Coffee Grounds Funnel/Distributor for Gaggia Classic by kitahiro921 which I used for what felt like a decade without any issues. The issue with it is that it is not modeled with printing in mind. It requires support and then still is a pain to get printed in good quality.
This is a remake of it that prints with less hassle. No support needed. The model includes support that breaks away very easily when printed at layer height <0.2mm.
You will probably have to flip it upside down in your slicer.
I printed it for my Gaggia Cubika but it should fit more machines that have a 58mm basket.