1 / 6
Ender 3 V2 locking bed knob for Silicon Springs — zdjęcie 1
1 / 6

Ender 3 V2 locking bed knob for Silicon Springs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I like this version and decided to use it with my Silicon Springs.

Ocena
0 / 5
Polubienia
21
Pobrania
73
Wydruki
0
Wyświetlenia
1307
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Wanted to use this design with my silicon springs and  added handles. Great concept so I chose it. I added a 3mf with the supports on the strain relief so you could see how I did it. 

Printed on my 2 Aquila's converted to Ender 3 V2's using Mriscoc Professional Firmware and my center mounted BLTouch FANG Duct system.

2mm Side inserted Shim's are included. Some of my corners need the extra to make thigs work out so I included them for a usable option to make sure all corners have tight knobs.