1 / 4
Ender 3 / Aquila Style Spool Holder Adapter Inverters — zdjęcie 1
1 / 4

Ender 3 / Aquila Style Spool Holder Adapter Inverters

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ender 3 / Aquila Style Spool Holder Adapter Inverters Works for all 2020 Ender Style Top Rails

Ocena
0 / 5
Polubienia
2
Pobrania
27
Wydruki
0
Wyświetlenia
255
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

Ender 3 / Aquila Style Spool Holder Adapter Inverters

Works for all 2020 Ender Style Top Rails that the Original Spool holder uses.

These adapters use the Original Holder and move it to 2 new locations. Both Invert the Holder so it can now be loaded from the front.

The short version is used when the filament needs to be inline with the top rail as when the Extruder Drive is moved to the Top Rail of the printer. It can be used with angle adapters as well.

The Longer Version simply moves the mounting location far enough back so that front loading is now available on Stock printers with 2020 rails

Both have 5mm pass thru holes so T-Nuts can be used as well as a 9.25mm nut slot on the back side so a bolt can be passes thru. My Aquila had 4 holes drilled in it so this was perfect.

I plan to convert my Aquila Extruder Drive to the top rail soon and will post that project. I needed these first.

Category: 3D Printer Accessories

Tagi