1 / 8
4040 extrusion Dual V Slot 100mm Extension Blocks and Hinge — zdjęcie 1
1 / 8

4040 extrusion Dual V Slot 100mm Extension Blocks and Hinge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

4040 extrusion Dual V Slot 100mm Extension Blocks and Hinge for use with T-Nuts…

Ocena
0 / 5
Polubienia
6
Pobrania
36
Wydruki
0
Wyświetlenia
404
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

4040 extrusion Dual V Slot 100mm Extension Blocks and Hinge for use with T-Nuts

\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\

PS: I know you see the nuts protruding on my hinge mounting plate but that's because that is my first print and that's when I realized I forgot the nut cutouts. So I did make the nut holes as you see in the renders.

JB

\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\

I needed an extension for my Aquila's control box so I made a suite and one with a 180 degree hinge that is very strong.

Hinge uses an M3X45mm and washer and nut. Blocks use t-nuts to attach to rail via the round holes and your implementation attaches with the front holes with molded nut slots.

100mmX10/15/20mm widths

Hinge is parts are 60mmx10mm and when assembled is 100mm

If you need a specific need please feel free to contact me.

James B

[email protected]

Print Settings

Notes:

lay flat with nut slots up, no need for supports.

Category: 3D Printer Accessories

Tagi