Pixel 7 Pro w Spigen Case USB Mount for 2018 Subaru Legacy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for the pixel 7 in a spigen case that allows you to connect and disconnect your phone with one hand.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 1774
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I got tired of plugging my phone in every time I got in my car so I made this mount. The base fits in to the change bin on the console; I used some friction tape to keep it in place. The stem is screwed in to the top of the base with a washer so it can rotate. The top of the base fits in to the tabs on the bottom and is secured with two pieces of filament. The mount is super glued stem; this is the only part that requires glue.
The USBC bracket is designed to house a 90 degree USB cable like this one and fit securely in to the bottom of the mount. Once the USB housing is inserted, the back plate for the mount secures it in place. It takes some force to insert the back plate but once it's in, it can't be removed without breaking the mount.
This is designed to be reusable so the phone mount, the USBC housing, and the base for the Legacy console can all be remixed or used as is for other purposes.
Features:
- Looks cool
- Guides phone to snap in to place and slide on to USB with one hand
- Secured to console so mount doesn't come out when phone is removed
- Rotates
I designed this in Fusion 360 (This is my first design and my first time using Fusion)
I printed it at .1mm in PLA+ but I may reprint in PETG if it doesn't stand up to the summer heat.